SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart User Manual

S YSTEM M ANAGEMENT C OMMANDS
3-41
Example
Related Commands
ip ssh (3-37)
logging on
Use this command to control logging of error messages. This
command sends debug or error messages to a logging process.
The no form disables the logging process.
Syntax
logging on
no logging on
Default Setting
None
Command Mode
Global Configuration
Command Usage
The logging process controls error messages saved to switch
memory or sent to remote syslog servers. You can use the
logging history command to control the type of error
messages that are stored in memory. The logging trap
command controls the type of error messages that are sent to
specified syslog servers.
Console#show ip ssh
Information of secure shell
SSH status: enable
SSH authentication timeout: 120
SSH authentication retries: 3
Console#
b_mgmt.book Page 41 Tuesday, July 8, 2003 5:24 PM

SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart Specifications

General

Brand	SMC Networks
Model	SMC EZ Switch 10/100/1000 SMCGS8P-Smart
Category	Switch
Language	English