P
RIORITY
C
OMMANDS
3-165
Example
The following example shows how to map CoS values 0, 1 and 2
to CoS priority queue 0, value 3 to CoS priority queue 1, values 4
and 5 to CoS priority queue 2, and values 6 and 7 to CoS priority
queue 3:
Related Commands
show queue cos-map (3-166)
show queue bandwidth
Use this command to display the Weighted Round-Robin (WRR)
bandwidth allocation for the four class of service (CoS) priority
queues.
Default Setting
None
Command Mode
Privileged Exec
Example
Console(config)#interface ethernet 1/1
Console(config-if)#queue cos-map 0 0 1 2
Console(config-if)#queue cos-map 1 3
Console(config-if)#queue cos-map 2 4 5
Console(config-if)#queue cos-map 3 6 7
Console(config-if)#
Console#show queue bandwidth
Queue ID Weight
-------- ------
0 1
1 4
2 16
3 64
Console#
b_mgmt.book Page 165 Tuesday, July 8, 2003 5:24 PM
To Next Page
Loading...
Need help?
General
