Setupmenu3 For detai/s on the operation _ page 80
The default settings are marked with 8.
During shooting, tile recording iuformation display appears on tile LCD monitor. You can
change the displayed time of the display.
1rain. Displays for one minute.
30 sec. Displays for 30 seconds.
10 sec. Displays for 10seconds.
5 see. Displays for five seconds.
• The display appearsagain ifyou press tileshuuer buuon hall\ray down or perlorm some other operalion.
If you do not operate tile camera for given period of time, the camera turns to power saving
mode and ahnost completely shuts down (Power Save). -.+ ,rge1) 3 in "Read TIiis First"
You can set the time to turn tile camera to the power save mode.
30 rain. The camera turns to po_er save mode after 30 minutes.
10 rain. The camera turns to po_er save mode after 10minutes.
5 min. The camera turns to po_er save mode after five minutes.
3 min. The camera turns to po_er save mode after three minutes.
1 rain. The camera turns to po_er save mode after one minute.
• Pressing tile shuuer buuon returns tile camera to lhe recording mode.
In tile default setting, when you press the MENU button, tile It_ 1 or [] 1 menu screen is
displayed first. You can change this setting to display the previously selected menu screen
first.
Off Displays the It"t 1or [] 1 menu screen first.
On Displays the previously selected menu screen first.
102
To Next Page
Loading...
Need help?
General
