SetupmenuI For detai/s on the operation _ page 80
The default settings are marked with 8.
You can a([iust the brightness of tile LCD monitor.
Set LeD brightness
Low- • • _ • • + High
l_:adiust O :enter _
(_) Select [Enler] in [LCDbrighlness].
@ Acljust Ihe brightness with 41_- on the conholler or with the conhol dial Ihen press Ihe cenler of
the controller.
Selects the USB mode to be used when connecting the camera to a computer, etc.. using a
USB cable.
MassStorage Used for copying images to the computer. The camera is
recognized as a USB mass storage device.
PTP Prints the images with a PictBridge compliant printer or
copies images to PTP (Picture Transfer Protocol) compliant
devices.
• For delails on prinling wilh a PictBridge con/plianl prinler, see
page 123.
Sets the video signal output according to the TV color system of the connected video
equipment. Difl'crent countries and regions use difl'erent TV color systems. If you want to
view images on a TV screen, check page 79 for the TV color system of the country or region
where the camera is used.
NTSC Sets the video output signal to NTSC mode (e.g., for the USA,
Japan).
PAL Sets the video output signal to PAL mode (e.g., for Europe).
98
To Next Page
Loading...
Need help?
General
