Fordetailsontheoperation_ page 60
_IQ_2
_°d _
_o__o.g
(_: The default setting)
Singleqrame advance
• Also used as the cancel bretonlbr other drive modes.
Continuous advance (see belong)
Self4imer (page 62)
Continuous bracket (page 62)
Single bracket lpage 63)
White balance bracket (page 641
When you press attd hold the shutter button, the camera records the images continuously at a
maximunl (if three images per second.
• The number of ftames thai can be shot continuously is indicated in the view finder, and when shooting
continuously, this number decreases.
Atter the images have been recorded on the recording medium, the number returns to the original number,
depending on the camera memory butlhr.
-2..,..'..,..2@
• When the built-in flash is fired, images are shot after the flash has been charged.
• When [AF model is set to [_ (Continuous AF) or [_ (Automatic AF), the locus is set separately on
each image. When set to _ (Single-shot AF), the locus is fixed on the Iirst image.
• The last image is displayed in instam playback.
• The number of conlhluous shooting images obtainable has an upper linlit.
Tire maximum number of continuous sbots
Fine/Standard No limit :_(Until the
recording medium is fldl)
RAW & JPEG 3 images
RAW 6 images
* When [Image size] is set to [M:5.6MI or [S:2.5MI, the shooting speed is slightly slower when shooting
the tourth and lollowing images.
• These numbers depend on the writing speed of a recording medium, the condition of the subject, etc. So,
use the table only as a guide.
61
To Next Page
Loading...
Need help?
General
