Viewingimagesona TVscreen
You Call view images on ,_/TV screen by
ct)nnecting tile camera to a TV.
Turn elf bolb your camera and tbe TV
before ct)nnecting tile catnera mtd tbe TV.
1Connect the camera to the TV.
(]) To video input jack
Video cable
__u_========_
To the VIDEO
jack
/ Turn on the TV and set the TV/
video input switch to "video."
• For details, see tile operating instructions
supplied with die TV,
3 Turnon the camera, and press []
(Playback).
[] button
Controller
Images shot with the camera appear on
the TV screen.
Press "_/P" on the controller te select tbe
desired image.
• When using your camera abroad, il nlay be
necessary to switch the video signal output
1omatch thai of your TV syslem (page 98).
• When you display the images recorded in
Adobe RGB mode on the camera or sRGB
devices, such as on TV'dLCD monitors that are
not coml)atible with Adobe RGB (DCF2.0/
Exil2.21h the images are displayed by lower
intensity level.
• Tile LCD nlOllltOr on tile rear of die canlera does
noI turned on.
• The image quality displayed on a TV screen is a
little deteriorated conlparing to images
displayed on a PC nlonitor.
78
To Next Page
Loading...
Need help?
General
