• In the manual exposure mode, even when [ISO] (page 44) is _1 to [AUTO], it is fixed to ISO 100.
• You can assign tile flmction of tile control dial with [Ctrl dial set] in tile _ Cilstoln mcnu (page 94).
• The ,_c_ (Camera-shake warning) indicator does not appear in tile manual exposure nlode.
• When the flash is pulled up, the flash fires regardless of the amount of ambient light (page 54).
"_" Ev scale
The Ev scale on tile LCD monitor and in tile view finder indicates the ditlcrcnce between the standard
exposure (O.OEv) determined by tile camera meter and the _1 exposure determined by the shueer speed, and
tile aperture specified by lhe pholographer. (Melered Manual)
Standard exposure
[= , ]
-2,,1,,0,,1,,2+
I
--2° -1 • "0" "1 ° -2+
The set exposure specified by
the photegr ipher ixthe same
as the exposure determined by
the meter.
1.0Ev over exposure
[] V
-2==1,,0,,1,,2+
[ ' 1-2° °1 , °0,,1 - ,2+
The set exposure specified by
the photographer is ] .0Ev
mere (+) than the standard
exposure determined by the
mereE
_1 : stands lor Metered Manuah
2.0Ev or more over
exposure
-2,,1,,0,,1,,2+
]
The < • arrow appears at the
end ef the scale if the set
exposure ix over 2.0Ev more
(+) or less 6) than the standard
exposure. The arrew starts
flashing if the difference
bccelnes greater.
38
To Next Page
Loading...
Need help?
General
