Sony DSR-200A User Manual

24
Inserting a cassette
Use a standard DVCAM cassette with logo*.
Make sure that a power source is installed.
We recommend you set the POWER switch to ON before inserting the cassette.
(1) Open the cassette compartment cover.
(2) Insert a cassette (not supplied) with the tab upwards, and the window facing
out and press down so that the cassette loads.
(3) Close the cover.
Note on the cassette
Mini DVCAM cassettes and Mini DV cassettes cannot be used.
* is a trademark.
1
3
2
EJECT6

Sony DSR-200A Specifications

Lens

zoom	10 x Zoom (f = 5.9 to 59 mm)
digital zoom	20 x
filter diameter	52 mm

Camera

image device	3 CCD 1/3-inch, Interline-Transfer Sensor
picture elements	768 (h) x 494 (v) (effective), 811 (h) x 508 (v) (total)
signal system	EIA standard, NTSC Color system

Power

power requirement	DC 7.2 V (Battery operation), DC 8.4 V (AC adaptor)
power consumption	11.6 W (during camera recording)
external DC input	4-pin for DK-715 cable

Operating Environment

operating temperature	0 C˚ to 40 C˚ (32 F˚ to 104 F˚)
storage temperature	-20 C˚ to 60 C˚ (-4 F˚ to 140 F˚)
viewfinder interface	8-pin connector

Dimensions

width	216 mm
height	237 mm
depth	474 mm

Weight and Dimensions

mass without tape and batteries	3.6 kg
mass with tape and batteries	4.7 kg
dimensions (w x h x d)	216 x 237 x 474 mm