Sony DSR-200A User Manual

68
ON OFF
STEADY SHOT
Releasing the STEADY SHOT function
When you shoot, the Ó indicator appears in the viewfinder. This indicates that the
Steady Shot function is working and the digital camcorder compensates for camera-
shake.
When you attach the digital camcorder to a tripod, you need not worry about camera-
shake.
Release the Steady Shot function.
Set STEADY SHOT to OFF.
To activate the Steady Shot function again
Set STEADY SHOT to ON.
Note on the Steady Shot function
The Steady Shot function will not correct excessive camera-shake.

Sony DSR-200A Specifications

Lens

zoom	10 x Zoom (f = 5.9 to 59 mm)
digital zoom	20 x
filter diameter	52 mm

Camera

image device	3 CCD 1/3-inch, Interline-Transfer Sensor
picture elements	768 (h) x 494 (v) (effective), 811 (h) x 508 (v) (total)
signal system	EIA standard, NTSC Color system

Power

power requirement	DC 7.2 V (Battery operation), DC 8.4 V (AC adaptor)
power consumption	11.6 W (during camera recording)
external DC input	4-pin for DK-715 cable

Operating Environment

operating temperature	0 C˚ to 40 C˚ (32 F˚ to 104 F˚)
storage temperature	-20 C˚ to 60 C˚ (-4 F˚ to 140 F˚)
viewfinder interface	8-pin connector

Dimensions

width	216 mm
height	237 mm
depth	474 mm

Weight and Dimensions

mass without tape and batteries	3.6 kg
mass with tape and batteries	4.7 kg
dimensions (w x h x d)	216 x 237 x 474 mm