Sony DSR-200A User Manual

47
Advanced operations
Interval recording
You can make a time-lapse like recording by setting the digital camcorder to
automatically record and standby sequentially. You can achieve an excellent recording
for flowering, emergence, etc., with this function.
(1) While the digital camcorder is in Standby mode, open the cover, then press
MENU to display the menu in the viewfinder.
(2) Press
or to select INT REC, then press EXECUTE.
(3) Press
or to select SET, then press EXECUTE.
(4) Press
or to select ON, then press EXECUTE.
(5) Press
or to select INTERVAL, then press EXECUTE.
(6) Press
or to select the desired waiting time, then press EXECUTE.
The time: 30SEC ˜ 1MIN ˜ 5MIN ˜ 10MIN.
(7) Press
or to select REC TIME, then press EXECUTE.
(8) Press
or to select the desired recording time, then press EXECUTE.
The time: 0.2SEC ˜ 0.5SEC ˜ 1SEC ˜ 2SEC.
(9) Press MENU to erase the menu display.
You can also press
to select RETURN, then press EXECUTE to return to
the menu display.
(10) Press START/STOP to start interval recording.
To stop interval recording
Press START/STOP twice.
To cancel interval recording
Set the INT REC mode to OFF in the menu system.
Note on interval recording
You cannot do interval recording with photo recording.
If you change the mode as follows, interval recording is cancelled
•Turn STANDBY down to LOCK.
•Set the POWER switch to OFF.
•Set CAMCORDER/VTR to VTR.
MENU
1
INTERVAL REC
RETURN
SET
INTERVAL
REC TIME
[ RETURN ] : MENU
INTERVAL REC
SET OFF
ON
[ MENU ] : END
INTERVAL REC
REC TIME 0.2SEC
0.5SEC
1SEC
2SEC
[ MENU ] : END
INTERVAL REC
RETURN
SET
INTERVAL
REC TIME 2SEC
[ RETURN ] : MENU
INTERVAL REC
RETURN
SET ON
INTERVAL
REC TIME
[ RETURN ] : MENU
INTERVAL REC
INTERVAL 30SEC
1MIN
5MIN
10MIN
[ MENU ] : END
INTERVAL REC
RETURN
SET
INTERVAL 5MIN
REC TIME
[ RETURN ] : MENU
2
3
4
6
7
8
5
MENU
DIGITAL F
D ZOOM
16 : 9WIDE
ZEBRA
TC IND
DATE/TIME
COMMANDER
[ MENU ] : END
ZOOM/WIDE

Sony DSR-200A Specifications

Lens

zoom	10 x Zoom (f = 5.9 to 59 mm)
digital zoom	20 x
filter diameter	52 mm

Camera

image device	3 CCD 1/3-inch, Interline-Transfer Sensor
picture elements	768 (h) x 494 (v) (effective), 811 (h) x 508 (v) (total)
signal system	EIA standard, NTSC Color system

Power

power requirement	DC 7.2 V (Battery operation), DC 8.4 V (AC adaptor)
power consumption	11.6 W (during camera recording)
external DC input	4-pin for DK-715 cable

Operating Environment

operating temperature	0 C˚ to 40 C˚ (32 F˚ to 104 F˚)
storage temperature	-20 C˚ to 60 C˚ (-4 F˚ to 140 F˚)
viewfinder interface	8-pin connector

Dimensions

width	216 mm
height	237 mm
depth	474 mm

Weight and Dimensions

mass without tape and batteries	3.6 kg
mass with tape and batteries	4.7 kg
dimensions (w x h x d)	216 x 237 x 474 mm