Sony DSR-200A User Manual

95
Additional information
Warning indicators
If indicators flash in the viewfinder, or a caution lamp on the digital camcorder flashes,
check the following:
≥: you can hear the beep sound when the BEEP is set to ON.
1234
5678
90
5min
C MEMORY
!¡
COPY
INHIBIT
1 The battery is weak or dead.
Slow flashing: The battery is weak.
Fast flashing: The battery is dead.
2 The tape is near the end.
The flashing is slow.
3 The tape has run out.
The flashing becomes rapid.
4 No tape has been inserted.
5 The tab on the tape is out (red).
6 Moisture condensation has occurred.
7 The video heads may be
contaminated.
This indicator appears only in the
viewfinder.
8 Some other trouble has occurred.
Disconnect the power source and
contact your Sony dealer or local
authorized facility.
9 The lithium battery is weak or is not
installed.
0 Updating the cassette memory data.
Wait until C MEMORY disappears.
The cassette compartment automatically
lifts up and opens after the indicator
disappears.
!¡ You tried to playback or record a
picture that has a copyright signal.

Sony DSR-200A Specifications

Lens

zoom	10 x Zoom (f = 5.9 to 59 mm)
digital zoom	20 x
filter diameter	52 mm

Camera

image device	3 CCD 1/3-inch, Interline-Transfer Sensor
picture elements	768 (h) x 494 (v) (effective), 811 (h) x 508 (v) (total)
signal system	EIA standard, NTSC Color system

Power

power requirement	DC 7.2 V (Battery operation), DC 8.4 V (AC adaptor)
power consumption	11.6 W (during camera recording)
external DC input	4-pin for DK-715 cable

Operating Environment

operating temperature	0 C˚ to 40 C˚ (32 F˚ to 104 F˚)
storage temperature	-20 C˚ to 60 C˚ (-4 F˚ to 140 F˚)
viewfinder interface	8-pin connector

Dimensions

width	216 mm
height	237 mm
depth	474 mm

Weight and Dimensions

mass without tape and batteries	3.6 kg
mass with tape and batteries	4.7 kg
dimensions (w x h x d)	216 x 237 x 474 mm