115
Movie recording setup
Shooting (Advanced operations)
Notes
• Movies recorded with the [60p 28M(PS)]/[50p 28M(PS)], [60i 24M(FX)]/[50i
24M(FX)] or [24p 24M(FX)]/[25p 24M(FX)] setting in [Record Setting] are
converted by “PMB” in order to create an AVCHD disc. This conversion can take a
long time. Also, you cannot create a disc with the original image quality. If you want
to keep the original image quality, you must store your movies on a Blu-ray disc.
• To watch 60p/50p or 24p/25p movies on a TV, you need a TV that is compatible
with 60p/50p or 24p/25p. If you use a non-compatible TV, the movies are converted
to 60i/50i and output to the TV.
When you record movies, the operating noise of the camera or lens may be
recorded. You can record movies without audio.
MENU button t 1 t [Audio Recording] t [Off]
When the focus mode is set to manual focus, you can disable recording of
the operating noise of the lens for the autofocus (page 123).
To reduce wind noise
You can reduce wind noise by cutting bass sound input from the built-in
microphone.
MENU button t 1 t [Wind Noise Reduct.] t [On]
Notes
• Setting this item to [On] may cause some bass sound to be recorded with too low a
volume. Set it to [Off] when the wind is not blowing.
• When an external microphone (sold separately) is used, this item does not function.
Audio Recording
To Next Page
Loading...
Need help?
General
