179
Setting the other functions of the camera
Setup of the camera (Advanced operations)
You can set different time intervals for the camera to switch to power save
mode (Power Save). Pressing the shutter button halfway down returns the
camera to the shooting mode.
MENU button t 1 t [Power Save] t Select the desired
time
Note
• The camera does not turn to power save mode when the camera is connected to a TV
or the drive mode is set to [Remote Cdr.].
You can disable the automatic switching of the LCD monitor and the
viewfinder and enable only the FINDER/LCD button to switch them.
MENU button t 1 t [FINDER/LCD Setting] t [Manual]
Power Save
FINDER/LCD Setting
To Next Page
Loading...
