Sony SRG-A40 User Manual

48
Accessing the Camera from a Web
Browser
You can access the camera from a web browser
on a computer to operate the camera, change
the setting, and upgrade the firmware.
An IP address must be set on the camera for
ac
cess from a web browser. For details on IP
address settings, refer to “RM-IP Setup Tool
Guide.”
Setting-up the Computer
System configurations required for the Computer
are shown in the following (as of May 2023).
OS/Web browser
Windows
OS version
Windows 11 (64-bit version)
Windows 10 (64-bit version)
Web browser
Google Chrome (Recommended)
Microsoft Edge
macOS
OS version
macOS 11
macOS 12
Web browser
Google Chrome
CPU
Intel® Core™ 7th generation (Kaby Lake) or later
(Recommended)
Memory
8 GB (Recommended)
Display
1920×1080 (Recommended)
Notes
• If the required system configurations are not
implemented, or depending on the computer
usage status, it may affect video-play
operation on a web browser.
• For Windows 10, turn off the tablet mode.
• Every page is optimized when the zoom
pe
rcentage is [100%] and font size is [Medium]
on a web browser.
• If an image does not fit on the screen, set the
d
isplay setting (zoom percentage) of your
computer to 100%.
• If you use a display with high pixel density, the
z
oom percentage may change automatically.
• Web pages displayed when you access the
c
amera are JavaScript. Web pages may not be
displayed correctly if some antivirus software
are used on your computer.
Accessing the Camera from a
Web Browser
Accessing the Web App entering
the camera’s IP address
Start a web browser on the computer and enter
the IP address of the camera in the address bar.
This camera’s Web App screen is displayed on
t
he web browser.
This camera is shipped with the DHCP mode.
Confirm the camera’s IP address on RM-IP Setup
To
ol.
Note
When the HTTP port number is changed from
“80”, enter “http://this camera’s IP address:port
number”.
Accessing the Web App entering
the camera’s URL
Start a web browser on the computer and enter
the URL which is printed on the bottom label of
the camera or the supplied URL label in the
address bar.
This camera’s Web App screen is displayed on
t
he web browser.
Note
Use an mDNS*-compliant device to access the
Web App when entering a URL.
* mDNS (multicast DNS): A communication rule
(p
rotocol) used to find an IP address from host
names in the local network.
Accessing the Web App using the
QR code
Take a picture of the QR code printed on the
camera’s bottom label or the supplied URL label
using a computer’s camera, etc., and open the
displayed link.
This camera’s Web App screen is displayed on
t
he web browser.

Sony SRG-A40 Specifications

General

Megapixel	8.5 MP
Camera type	Single camera
Sensor type	CMOS
White balance	Auto, Indoor, One push, Outdoor
Zoom capability	Yes
Gain control type	Auto/Manual
Focal length range	4.4 - 88 mm
Optical sensor size	1/2.5 \
Aperture range (F-F)	2 - 3.8
Light exposure modes	Auto, Manual
Minimum illumination	1.6 lx
Maximum working distance (tele)	800 mm
Minimum working distance (wide)	80 mm
Maximum frame rate	60 fps
Video formats supported	H.264, H.265
Maximum video resolution	3840 x 2160 pixels
Supported graphics resolutions	640 x 480 (VGA), 1280 x 720 (HD 720), 1920 x 1080 (HD 1080)
Pan range	-170 - 170 °
Product color	White
Pan speed (max)	300 °/sec
Tilt angle range	-20 - 90 °
Tilt speed (max)	126 °/sec
Bit rate control	Constant Bit Rate (CBR), Variable Bit Rate (VBR)
Supported protocols	IPv4, IPv6, TCP, UDP, ARP, ICMP, HTTP, HTTPS, DHCP, DNS, RTP/RTCP, RTSP, VISCA over IP, SRT
Multi-stream capability	3
Audio channels	2
Ethernet LAN (RJ-45) ports	1
DC input voltage	19.5 V
Power source type	DC, PoE
Power consumption (typical)	80 W
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Number of screws	6

Weight and Dimensions

Depth	200 mm
Width	156.7 mm
Height	184 mm
Weight	2000 g