59
are detected currently as the tracking
subjects, the green frame to the face of the
tracked subject are displayed.
Whether the Automatic Target Selection
(page 56) is valid or not, click the face in the
camera’s video section to recognize the face
o
f the tracking subject, to track only the
subject. When the subject is lost, move to
the configured start position, restart tracking
when the same face is recognized.
When you want to track the different subject,
se
lect the subject manually again. When you
want to select the subject who is on the start
position, perform [Restart] and then select
the tracking subject.
When selecting the tracking subject
m
anually while Automatic Target Selection is
valid, Automatic Target Selection is invalid
temporarily. Perform [Restart] to enable
Automatic Target Selection again.
Setting Screen
Location and function of the
setting screen
On the setting screen, you can set the camera’s
initial setting, network setting, and settings
required for shooting in the Web App menu.
Note
The setting is not determined until the [OK]
button in the Web App menu is pressed. When
the setting is changed on the page where the
[OK] button is displayed, make sure to press the
[OK] button.
For details of the setting screen, refer to “Web
App Menu Operation Method” (page 60).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
