EasyManuals Logo

Sony SRG-A40 User Manual

Sony SRG-A40
101 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #83 background imageLoading...
Page #83 background image
83
Stream Menu
Stream
Note
When the Streaming tab settings are changed, RTSP streaming is temporarily interrupted. Therefore, the
screen turns black for a moment when the viewer is displayed on other web browsers.
Stream Setting
RTSP
This setting item is displayed when [Stream Setting] is set to [RTSP].
Make settings related to RTSP Streaming.
Menu item Detail and setting
value
Initial setting value
of the factory
default setting
Content
Setting RTSP/SRT-Caller/
SRT-Listener/
NDI|HX/Off
RTSP The setting items corresponding to the selected
mode are displayed.
Menu item Detail and setting
va
lue
Initial setting value
of the factory
default setting
Content
Port Number 554, 1024 to 65534 554 Set the port number for RTSP.
Time Out 0 to 600 60 Specify the time for time out by the Keep-Alive
c
ommand from RTSP streaming.
At the [0] setting, time out of the Keep-Alive
c
ommand is not available.
Authentication On/Off On Set whether or not to perform user authentication for
RTSP streaming. When enabled, the user name and
password set in [User] will be authenticated. The
viewer cannot be displayed unless the correct user
name and password are entered.
Notes
The RTSP authentication setting affects acquisition
of the RTSP streaming on programs other than a
web browser. When you want to prevent getting
the streaming by users other than the ones you
set, set [Authentication] to On to use the camera.
When the setting is changed, RTSP streaming is
te
mporarily interrupted. Therefore, the screen
turns black for a moment when the viewer is
displayed on other web browsers.
Video Port
Num
ber 1
1024 to 65534 51000 Specify the transmission port number for video data
used for RTSP unicast streaming.
Video Port
Number 2
1024 to 65534 53000 Specify an even number in the setting range. Two port
numbers (the number specified here and an odd
number with 1 added to the specified number) are
actually used for video data communication and
control. When performing simultaneous multi-
transmissions, a different port number will be used
for every transmission, based on the port number
specified here.

Table of Contents

Other manuals for Sony SRG-A40

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sony SRG-A40 and is the answer not in the manual?

Sony SRG-A40 Specifications

General IconGeneral
Megapixel8.5 MP
Camera typeSingle camera
Sensor typeCMOS
White balanceAuto, Indoor, One push, Outdoor
Zoom capabilityYes
Gain control typeAuto/Manual
Focal length range4.4 - 88 mm
Optical sensor size1/2.5 \
Aperture range (F-F)2 - 3.8
Light exposure modesAuto, Manual
Minimum illumination1.6 lx
Maximum working distance (tele)800 mm
Minimum working distance (wide)80 mm
Maximum frame rate60 fps
Video formats supportedH.264, H.265
Maximum video resolution3840 x 2160 pixels
Supported graphics resolutions640 x 480 (VGA), 1280 x 720 (HD 720), 1920 x 1080 (HD 1080)
Pan range-170 - 170 °
Product colorWhite
Pan speed (max)300 °/sec
Tilt angle range-20 - 90 °
Tilt speed (max)126 °/sec
Bit rate controlConstant Bit Rate (CBR), Variable Bit Rate (VBR)
Supported protocolsIPv4, IPv6, TCP, UDP, ARP, ICMP, HTTP, HTTPS, DHCP, DNS, RTP/RTCP, RTSP, VISCA over IP, SRT
Multi-stream capability3
Audio channels2
Ethernet LAN (RJ-45) ports1
DC input voltage19.5 V
Power source typeDC, PoE
Power consumption (typical)80 W
Storage temperature (T-T)-20 - 60 °C
Operating temperature (T-T)0 - 40 °C
Number of screws6
Weight and Dimensions IconWeight and Dimensions
Depth200 mm
Width156.7 mm
Height184 mm
Weight2000 g

Related product manuals