62
System Menu
Information
Displays the camera information.
Date & Time
Performs settings related to the inner clock.
Menu item Detail and setting
value
Initial setting value
of the factory
default setting
Content
Model Name ― ― Displays the camera model name.
Serial Number ― ― Displays the camera serial number.
Version Number ― ― Displays the camera software version number.
Menu item Detail and setting
va
lue
Initial setting value
of the factory
default setting
Content
Current Date &
Tim
e
― ― Displays the current time set in this camera.
PC Clock ― ― Displays the current time of the computer used for
setting.
Date & Time
Fo
rmat
yyyy-mm-dd
hh:mm:ss /
mm-dd-yyyy
hh:m
m:ss /
dd-mm-yyyy
hh:m
m:ss
yyyy-mm-dd
hh:mm:ss
Sets the display format of the date/time.
Time Setting Keep current
setting/
Synchronize with
PC
/
Manual setting/
Synchronize with
NT
P
― Selects the display format of the date/time.
yy-mm-dd
hh:mm:ss
yy: 22 to 35
mm: 01 to 12
hh: 00 to 23
mm: 00 to 59
ss: 00 to 59
― Displayed when [Time Setting] is [Manual setting].
Set the date and time manually.
NTP Auto On/Off Off Displayed when [Time Setting] is [Synchronize with
NT
P].
Sets whether the IP address of the NTP server is
acq
uired from the DHCP server or not.
NTP Server IPv4/IPv6 Address/
Host Name
― Displayed when [Time Setting] is [Synchronize with
NTP] and [NTP Auto] is off at the same time.
Specifies the NTP server for the time synchronization.
Time Zone UTC -12:00 to UTC
+14:00
― Selects the time zone.