3-22 ENGINE
ENGINE COMPONENTS INSPECTION
AND SERVICE
CYLINDER HEAD
DISASSEMBLY
Identify the position of each removed part. Organize
the parts in their respective groups (i.e., exhaust or in-
take) so that they can be installed in their original posi-
tions.
Remove the intake pipe.
Remove the engine coolant hose housing.
Remove the tappets 1 and shims 2 by hand or by using a
magnet.
Compress the valve springs, and then remove the valve cot-
ters from the valve stem using the special tools.
09916-14510: Valve spring compressor
09916-14910: Attachment
09916-84511: Tweezers
Remove the valve spring retainer and valve springs.
Remove the valve from the other side.
2
2
To Next Page
Loading...
Need help?
General
