5-14 CHASSIS
REMOVAL AND DISASSEMBLY
• Raise the front wheel off the ground using a jack or wooden
block.
• Remove the brake calipers and front wheel. (! 5-8)
$
FRONT FENDER
• Remove the brake hose clamp bolt
î›§
1 (RH).
• Remove the front fender mounting bolts and plates behind
(LH and RH).
• Disconnect the brake hose clamp
î›§
2 from the front fender.
FRONT FORK
• Loosen the front fork upper clamp bolt
î›§
1.
NOTE:
Slightly loosen the front fork cap bolt
î›§
2 to facilitate later disas-
sembly.
• Loosen the front fork lower clamp bolts
î›§
3.
• Remove the front fork.
* Make sure that the motorcycle is supported securely.
* Do not operate the front brake lever with the front
wheel removed.