5-24 CHASSIS
STEERING
REMOVAL (GSF650)
• Remove the front wheel. (!5-8)
• Remove the front forks. (!5-14)
• Remove the headlight. (!6-41)
• Disconnect the couplers.
• Remove the headlight housing
î›§
1 and bracket
î›§
2.
• Remove the brake hose clamp
î›§
3.
• Remove the combination meter unit
î›§
4.
• Remove the ignition switch
î›§
5 using the special tools.
% 09930-11920: Torx bit (JT40H)
09930-11940: Bit holder
• Dismount the handlebars by removing the handlebar holder
nuts.
HANDLEBAR HEIGHT ADJUSTMENT .... (!5-75)
• Remove the steering stem head nut and washer.
• Remove the steering stem upper bracket
î›§
6.
• Remove the steering stem nut using the special tool.
% 09940-14911: Steering stem nut wrench
NOTE:
When loosing the stem nuts, hold the steering stem lower
bracket to prevent it from falling.
• Remove the steering stem lower bracket.