3-62 ENGINE
• After selecting a left-side thrust bearing, install it and then
measure the thrust clearance again.
NOTE:
The right-side thrust bearing color code

1 and part number are
as follows. GREEN (12228-43414).
CRANKSHAFT RUNOUT
Support the crankshaft using V-blocks as shown, with the two
end journals resting on the blocks. Set up the dial gauge as
shown, and rotate the crankshaft slowly to read the runout.
Replace the crankshaft if the runout exceeds the service limit.
) 09900-20606: Dial gauge (1/100 mm)
09900-20701: Magnetic stand
09900-21304: V-block set (100 mm)
( Crankshaft runout
Service Limit: 0.05 mm
To Next Page
Loading...
Need help?
General
