5-30 CHASSIS
REMOVAL
• Support the motorcycle with the center stand.
• Remove the cotter pin. (E-28)
• Remove the rear axle nut
î›§
1.
• Remove the rear axle and disengage the drive chain from the
rear sprocket.
• Remove the rear wheel.
$
• Remove the spacer
î›§
2 (LH) and collar
î›§
3 (RH).
• Remove the rear sprocket mounting drum assembly
î›§
4 from
the rear wheel.
NOTE:
Before removing the rear sprocket mounting drum, slightly
loosen the rear sprocket nuts to facilitate later disassembly.
• Remove the retainer
î›§
5.
• Remove the rear sprocket from sprocket mounting drum.
Do not operate the rear brake pedal with the rear
wheel removed.