Suzuki GSF650S User Manual

CHASSIS 5-27
Inner race
• Press in the lower inner race using the special tool.
% 09941-74911: Steering bearing installer
Bearing
• Apply SUZUKI SUPER GREASE to the bearings, races and
dust seals before remounting the steering stem.
' 99000-25010: SUZUKI SUPER GREASE “A”
Steering stem
• Tighten the steering stem nut to the specified torque using the
special tool.
%09940-14911: Steering stem nut wrench
# Steering stem nut: 45 N·m (4.5 kgf-m)
• Turn the steering stem lower bracket about five or six times to
the left and right so that the angular ball bearings seat prop-
erly.
• Loosen the steering stem nut 1/4 – 1/2 turn.
NOTE:
This adjustment will vary from motorcycle to motorcycle.
• Install the headlight bracket.
• Temporarily install the front forks. (!5-20)
• Tighten the steering stem head nut to the specified torque.
# Steering stem head nut: 65 N·m (6.5 kgf-m)

Suzuki GSF650S Specifications

General

Engine Type	4-stroke, 4-cylinder, liquid-cooled, DOHC
Bore x Stroke	65.5 mm x 48.7 mm
Compression Ratio	11.5:1
Fuel System	Fuel injection
Ignition	Electronic ignition (transistorized)
Transmission	6-speed constant mesh
Final Drive	Chain
Front Suspension	Telescopic, coil spring, oil damped
Rear Suspension	Link type, coil spring, oil damped
Displacement	656 cm³
Front Brakes	Disc
Rear Brakes	Disc
Front Tire	120/70ZR17
Rear Tire	160/60ZR17
Fuel Tank Capacity	19 liters
Seat Height	790 mm