Suzuki GSF650S User Manual

ENGINE 3-57
• Check the corresponding crank pin O.D. code numbers (“1”,
“2” or “3”)

3.
Bearing selection table
Conrod I.D. specification
Crank pin O.D. specification
) 09900-20202: Micrometer (25 – 50 mm)
Bearing thickness specification

A Color code
$
Crank pin O.D.

3
Code 123
Conrod
I.D.

2
1 Green Black Brown
2 Black Brown Yellow
Code I.D. specification
1 37.000 – 37.008 mm
2 37.008 – 37.016 mm
Code O.D. specification
1 33.992 – 34.000 mm
2 33.984 – 33.992 mm
3 33.976 – 33.984 mm
Color (Part No.) Thickness
Green
(12164-26E00-0A0)
1.480 – 1.484 mm
Black
(12164-26E00-0B0)
1.484 – 1.488 mm
Brown
(12164-26E00-0C0)
1.488 – 1.492 mm
Yellow
(12164-26E00-0D0)
1.492 – 1.496 mm
The bearings should be replaced as a set.

Suzuki GSF650S Specifications

General

Engine Type	4-stroke, 4-cylinder, liquid-cooled, DOHC
Bore x Stroke	65.5 mm x 48.7 mm
Compression Ratio	11.5:1
Fuel System	Fuel injection
Ignition	Electronic ignition (transistorized)
Transmission	6-speed constant mesh
Final Drive	Chain
Front Suspension	Telescopic, coil spring, oil damped
Rear Suspension	Link type, coil spring, oil damped
Displacement	656 cm³
Front Brakes	Disc
Rear Brakes	Disc
Front Tire	120/70ZR17
Rear Tire	160/60ZR17
Fuel Tank Capacity	19 liters
Seat Height	790 mm