Suzuki VL125 Service Manual

5-40 CHASSIS
WHEEL BEARING
• Apply SUZUKI SUPER GREASE “A” to the bearing before in-
stallation.
/ 99000-25010: SUZUKI SUPER GREASE “A”
REAR SPROCKET MOUNTING DRUM BEARING
• Install the rear sprocket mounting drum bearing and dust seal
using the special tool.
% 09941-34513: Bearing/steering race installer
NOTE:
Apply grease to the bearing and dust seal lip before assembling
the rear sprocket mounting drum.
/ 99000-25010: SUZUKI SUPER GREASE “A”
Left
Right
Left
Right
Clearance
Spacer
• Press fit the bearing to the wheel using the special tools.
% 09941-34513: Bearing/steering race installer A
09913-70210: Bearing installer set (
φ 35 mm) B
7
* First install the right wheel bearing, then left wheel bear-
ing.
* The sealed cover on the bearing must face out.

Suzuki VL125 Specifications

General

Displacement	124 cc
Ignition	Electronic ignition (CDI)
Starter	Electric
Transmission	5-speed constant mesh
Final Drive	Chain
Front Suspension	Telescopic, coil spring, oil damped
Rear Suspension	Swingarm, coil spring, oil damped
Rear Brake	Drum
Overall Length	2, 080 mm
Overall Width	760 mm
Ground Clearance	150 mm
Fuel System	Carburetor
Front Brake	Single disc
Front Tire	90/90-18
Seat Height	735mm