10 Description TB7300 Installation and Operation Manual
© Tait International Limited December 2022
1 Description
The Tait TB7300 base station is a robust state-of-the-art digital fixed
station that combines Tait’s proven strengths in reliability and high
performance with software-based configurability and operation, digital
signal processing and Voice over IP (VoIP) technology.
Its Ethernet interface provides built-in network connectivity that allows the
base station to join with other base stations to form a channel group. This
network supports voice-over-IP and remote management of all base
stations via a web browser.
1.1 Series 2 and Series 1 Reciters
Ongoing product improvements have meant that the processor in the reciter
control board has been upgraded with a SMARC (Smart Mobility
ARChitecture) module that provides faster start up times, as well as
capacity for future upgrades.
Due to this hardware change, series 2 reciters require version 3.10 or later
firmware, and cannot be downgraded to earlier firmware. Version 3.10
was released on 31 July 2020 and production was changed over to series 2
during August 2020.
Series 1 control boards are now out of production.
1.1.1 Identifying a Series 2 Reciter
Series 2 reciters can be identified by the label on the back of the reciter.
Together with the type code and serial number is this graphic indicating
that this is a series 2 reciter:
To Next Page
General
