TB7300 Installation and Operation Manual Connecting to the Base Station 43
© Tait International Limited December 2022
4.4 Basic Tasks
4.4.1 User Settings
Click on your user name in the top right corner of the page to change your
password. Note that this information is stored in the base station, not in
your browser.
4.4.2 Taking the Base Station Offline
You may need to take the base station offline in order to carry out
diagnostic tests or to take it out of service if a fault develops.
1. Click Mode on the status bar (or Select Tools > Settings > Base Sta-
tion).
2. Under Control, select Offline. Click Offline to confirm the change.
In the Status area, the Mode display changes first to
Changing, and
then to
Offline ().
4.4.3 Troubleshooting Alarms
If the Alarm status on the status bar displays red, one or more alarms have
been triggered, and the Alarms menu automatically expands to display the
alarm(s). Click Help and navigate to the description of that alarm.
To Next Page
General
