Tait TB7300 User Manual

58 Installation TB7300 Installation and Operation Manual
© Tait International Limited December 2022
5.3 Identifying the Equipment
You can identify the model and hardware configuration of the TB7300 by
referring to the product code printed on a label at the rear of the base
station. The meaning of each character in the product code is explained in
the table below.
This explanation of product codes is not intended to suggest that any
combination of features is necessarily available in any one product.
Consult your regional Tait office for more information regarding the
availability of specific models and options.
Product Code Description
TB7310-XX
XX-XXXX-XXXX-10 DMR/MPT
Frequency Band
B1 = 136 MHz to 174MHz
B3 = 148 MHz to 174MHz
H3 = 470MHz to 520MHz
H5 = 400 MHz to 470 MHz
K4 = 762MHz to 870MHz
a
a. The actual frequency coverage in this band is:
Transmit: 762MHz to 776MHz, and 850MHz to 870MHz
Receive: 792MHz to 824MHz
TB7360-XX
XX-XXXX-XXXX-10 P25/AS-IP
Frequency Band
B1 = 136 MHz to 174MHz
B3 = 148 MHz to 174MHz
H5 = 400 MHz to 470 MHz
K4 = 762MHz to 870MHz
a
TB73XX-XXXX-XXXX-XXXX-10 B = 35/40/50W
TB73XX-XXXX
-XXXX-XXXX-10 0 = Default
TB73XX-XXXX-XXXX
-XXXX-10 0 = Default
TB73XX-XXXX-XXXX-X
XXX-10 0 = 13.8VDC (nominal) input
A = 120V and 230VAC input
TB73XX-XXXX-XXXX-XX
XX-10 0 = Default (no mains cable)
1 - 5 = Mains cable type
TB73XX-XXXX-XXXX-XXXX
-10 Feature License
00 = None [Default: Analog (TBAS301)]
AC = DMR Express SFE License with TDMA
operation (TBAS302)
AD = DMR Access SFE License with TDMA
operation (TBAS303)
AE = DMR conventional (TBAS304)
TB73XX-XXXX-XXXX-XXXX-10
10 = default

Tait TB7300 Specifications

General

Brand	Tait
Model	TB7300
Category	Accessories
Language	English