62 Installation TB7300 Installation and Operation Manual
© Tait International Limited December 2022
5.4.3 Customizing the Configuration
The following steps provide an overview of the process used to configure
the base station with the settings it needs. Refer to the Help for more
detailed information.
1. Log in to the base station (refer to “Connecting Your PC to the Base
Station” on page 34 for more details).
2. Select ‘Configure.’ The base station has many different settings that
can be configured before it is put into operation, such as:
■ Channel configurations
■ Alarm control and SNMP agent
■ Network interfaces
■ Quality of service
■ CWID
■ Miscellaneous items such as minimum battery voltages, fan
control, NTP and package servers.
3. Make the changes needed in each form and click, ‘Save.’ All
changes made in the form will only be applied when the form is
saved.
Notice Before making changes, you should save the configuration to
your PC or network; this provides a baseline which can be restored to
the base station if the configuration information becomes lost or cor-
rupted.
You should also back up the configuration before downgrading to a dif-
ferent software release. Note that if you downgrade and then upgrade
software, configuration values for new features will generally disable
the feature.
Default
Configuration
Parameters
The base station is delivered from the factory with a saved configuration
containing factory defaults. The configuration is named something like
QBCS20CF_11.dat.
The default configuration file is associated with both P25/AS-IP and DMR/
MPT and serves as a starting point for when you need to create your own
tailored configuration.
Base stations from the factory all have the same default configuration file.
As a result, some settings will not be correct for your network. Frequency
plan and alarm settings are examples.
For further information, please contact your local Tait dealer.
To Next Page
General
