EasyManuals Logo
Home>TC-Helicon>Recording Equipment>Voicelive 2

TC-Helicon Voicelive 2 User Manual

TC-Helicon Voicelive 2
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #74 background imageLoading...
Page #74 background image
Overview
The FX tab contains the edit settings for a combination
of two effects:
o Transducer, which uses distortion and steep
filters to emulate the sound of radios, phones and
devices that generally degrade the audio signal.
o HardTune, which is a pitch corrector that has been
optimized to produce corrective pitch correction as
well as obvious effects made popular by a number
of artists.
Both effects can be used simultaneously or independently.
TRANSDUCER
This parameter turns the Transducer effect on or off for
the current preset.
ROUTING:
Selects where the Transducer effect is inserted into the
signal path for maximum flexibility. The options are:
o OFF - No routing.
o LEAD - Transducer is inserted on the Lead voice
only. Harmonies and Doubling are unaffected.
o HARMONY - Transducer is inserted on the
Harmony path only.
o VOICES - Transducer is inserted on both the Lead,
Harmony and Doubling voices.
o LEAD FX - Transducer is inserted on the Lead
send to the μMod, Delay and Reverb effect sends.
Lead voice will be clean and the effects will be
affected by the Transducer style.
o HARM FX - transducer is inserted on the
HARMONY send to the effects. Lead and
Harmony voices will be clean but the effects driven
by only the Harmonies will be affected by the
Transducer style.
TRANSDUCER STYLE
Use the soft knob assigned to this parameter to choose
a Transducer style you like. The Routing and Gate
Threshold parameters are not part of the style.
The Edit Menu: FX Tab
74

Table of Contents

Other manuals for TC-Helicon Voicelive 2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TC-Helicon Voicelive 2 and is the answer not in the manual?

TC-Helicon Voicelive 2 Specifications

Operating Environment IconOperating Environment
operating temperature32° F to 122° F (0° C to 50° C)
storage temperature-22° F to 167° F (-30° C to 70° C)
humidityMax. 90 % non-condensing
Power IconPower
external power supply mains voltage100 to 240 VAC, 50 to 60 Hz
power consumption<14 W
Analog Inputs IconAnalog Inputs
mic input impedance2.14/1.07 kOhm
line input impedance13/6.5 kOhm
guitar input impedance1 MOhm
Analog Outputs IconAnalog Outputs
output impedance100/50 Ohm
output range16 dBu / 0dBu
dynamic range> 109 dB, 20 Hz to 20 kHz
Weight and Dimensions IconWeight and Dimensions
dimensions13.8" x 3" x 8.5" (350 x 76 x 216)
weight5 lb. (2.3 kg)

Related product manuals