TC-Helicon Voicelive 2 User Manual

Overview
This tab contains parameters that don’t pertain to the
other tabs.
LEAD LEVEL
This allows the overall lead (dry with Tone) voice
level to be reduced for the current preset. There are
additional LEAD LEVEL parameters in the effect tabs
(uMOD, DELAY etc) which may be used to reduce
lead level further but only when their respective effect
is active.
LEAD PAN
Sets where your lead voice appears in the stereo field for the
current preset. This can be useful when panning a Harmony
voice to one side and your Lead voice to the other.
LEAD EFFECT SENDS
When set to PRE, your voice will be sent at a fixed level
to the μMOD, DELAY and REVERB effects regardless
of whether the LEAD LEVEL setting is reduced or off.
When LEAD LEVEL is off and LEAD EFFECT SENDS is
PRE, 100% wet effects can be achieved if desired. When
set to POST, effect levels follow the LEAD LEVEL value
so the effects stay in balance with your voice when its
level is reduced.
SHORTCUT
Each preset in VoiceLive 2 can have a unique Shortcut
which can extend your control of effect features.
Choose from the selections and save to your current
preset. Note that not all may apply e.g. Harmony Hold
may not work unless you have Harmony turned on.
EXPR-PEDAL
Sets the Expression pedal target for the current preset
when GLOBAL EXPR-PEDAL in the Setup tab is set to
OFF (Preset).
HARMONY + DOUBLE LEVEL DELAY + REVERB LEVEL
HARMONY LEVEL DOUBLE LEVEL
UMOD LEVEL DELAY LEVEL
REVERB LEVEL LEAD LEVEL
μMOD/DLY/REV LEVEL OUTPUT LEVEL
GUITAR LEVEL AUX LEVEL
DELAY SEND LEVEL REVERB SEND LEVEL
RHYTHMIC DEPTH RHYTHMIC DIVISION
The Edit Menu: PRESET Tab
82

TC-Helicon Voicelive 2 Specifications

Operating Environment

operating temperature	32° F to 122° F (0° C to 50° C)
storage temperature	-22° F to 167° F (-30° C to 70° C)
humidity	Max. 90 % non-condensing

Power

external power supply mains voltage	100 to 240 VAC, 50 to 60 Hz
power consumption	<14 W

Analog Inputs

mic input impedance	2.14/1.07 kOhm
line input impedance	13/6.5 kOhm
guitar input impedance	1 MOhm

Analog Outputs

output impedance	100/50 Ohm
output range	16 dBu / 0dBu
dynamic range	> 109 dB, 20 Hz to 20 kHz

Weight and Dimensions

dimensions	13.8" x 3" x 8.5" (350 x 76 x 216)
weight	5 lb. (2.3 kg)