EasyManuals Logo
Home>TC-Helicon>Recording Equipment>Voicelive 2

TC-Helicon Voicelive 2 User Manual

TC-Helicon Voicelive 2
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #86 background imageLoading...
Page #86 background image
CHANNEL
Sets the MIDI channel that VoiceLive 2 uses for presets
and MIDI harmony control. When a NATURALPLAY
preset is set to MIDI NOTES 4 CH, the channel
selected is the channel used for VOICE 1. The MIDI
channel for VOICE 2 is the selected MIDI channel + 1,
VOICE 3 is +2, VOICE 3 is plus 3.
FILTER
Allows MIDI Program Change or System Exclusive
messages to be ignored for convenience.
CC CHAN
Sets a separate MIDI channel for CC control if desired.
TRANSPOSE
This transposes the harmony voices in MIDI NOTES
mode to allow it to be controlled by upper or lower
sections of a MIDI keyboard if required. The value
corresponds to octaves.
SPLITDIR
(Split Direction) Sets whether MIDI notes ABOVE
or BELOW the split point are used to control MIDI
NOTES presets only.
SPLITNOTE
Sets the MIDI note above or below which the keyboard
split will be active.
SYSEXID
(MIDI System Exclusive ID number) When addressing
multiple VoiceLive 2 units on the same MIDI In/Thru
chain with a Sysex editor, each one should have its own
ID or they all will be edited in the same way.
VIBBOOST
Specifies how the Mod Wheel message affects vibrato if
it is enabled in a preset. The Boost setting (default) will
add more vibrato once the part of the wheel movement
reaches the corresponding amount of vibrato and then
returns to the original amount at rest position. The
Manual setting allows full range control of vibrato once
the wheel is moved. To restore the factory vibrato
amount, recall the preset.
The Setup Menu: MIDI Tab
86

Table of Contents

Other manuals for TC-Helicon Voicelive 2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TC-Helicon Voicelive 2 and is the answer not in the manual?

TC-Helicon Voicelive 2 Specifications

Operating Environment IconOperating Environment
operating temperature32° F to 122° F (0° C to 50° C)
storage temperature-22° F to 167° F (-30° C to 70° C)
humidityMax. 90 % non-condensing
Power IconPower
external power supply mains voltage100 to 240 VAC, 50 to 60 Hz
power consumption<14 W
Analog Inputs IconAnalog Inputs
mic input impedance2.14/1.07 kOhm
line input impedance13/6.5 kOhm
guitar input impedance1 MOhm
Analog Outputs IconAnalog Outputs
output impedance100/50 Ohm
output range16 dBu / 0dBu
dynamic range> 109 dB, 20 Hz to 20 kHz
Weight and Dimensions IconWeight and Dimensions
dimensions13.8" x 3" x 8.5" (350 x 76 x 216)
weight5 lb. (2.3 kg)

Related product manuals