Tektronix DPO71254C Printable Help

To use.
■
Click the Trigger Type box and select Bus from the drop-down list.
■
Click the Bus box and select the bus number or name from the drop-down list.
NOTE. You have the option to add a user-defined label for bus sources.
■
Click the Logic Thresholds Setup button to set the voltage threshold levels for the channels in the bus.
■
Select the type of bus cycle or activity to use as the trigger from the Trigger On drop-down list.
■
For some Trigger On selections, you must set additional fields to define other parameters such as for a Data.
In this example, you need to set the Data Format (click the drop-down list), Number of Bytes, and Data Value (click the Edit
button).
Not recommended for use with iCapture inputs.
What do you want to do next?
Learn about bus setups.
Set up a USB bus trigger
NOTE. The Bus Trigger Control Window for USB Serial option is available only on instruments with option SR-USB.
From the Trigger menu, select Bus setup.
Overview. Use the controls to set up the USB Bus parameters.
Trigger setups
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series 391

Tektronix DPO71254C Specifications

General

Brand	Tektronix
Model	DPO71254C
Category	Test Equipment
Language	English