To Next Page

To Previous Page

Cycle mean

This voltage measurement is the arithmetic mean over the first cycle in the waveform or the first cycle in the gated region.

Cycle RMS

This voltage measurement is the true Root Mean Square voltage over the first cycle in the waveform or the first cycle in the gated

region.

Data direction

In the Data Direction drop-down list, specify the data direction.

Data threshold

1. Click in the Data Threshold entry box.

2. Use a multipurpose knob to set the threshold voltage for the trigger.

Dead time between acquisitions

Delay edges

The Delay Edge buttons determine whether the measurements will be taken on the rising or falling edge of the waveform. After

selecting an edge, the graphic in the control window is updated to show the edge from which the measurements will be taken.

Delay

This timing measurement is the time between the mid reference (default 50%) amplitude point of two different waveforms

Trigger delay

Use the Trig Delay control to trigger the instrument a specified period of time after the A trigger. After the A trigger arms the

trigger system, the instrument triggers on the next B trigger event that occurs after the time that you specify with the Trig Delay

control.

■

Click in the Trig Delay entry box, and then use the multipurpose knob to enter the delay time.

Trigger events

Use the Trig Event control to trigger the instrument a specified number of events after the A trigger. After the A trigger arms the

trigger system, the instrument triggers on the nth B trigger event.

■

Click Trig Event, and then use the multipurpose knob to enter the number of B trigger events.

■

Click the increment/decrement buttons to enter the number of B trigger events.

Oscilloscope reference

DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series 751

Tektronix DPO71254C Printable Help

Other manuals for Tektronix DPO71254C