Tektronix DPO71254C Printable Help

Set logic properties
NOTE. Logic Properties option is available only on MSO5000B and MSO70000C/DX Series instruments and DPO5000B Series
instruments with option MSOE installed, and DPO70000DX instruments with option MSOU installed.
From the Vertical menu, select Vertical Setup. From the Math menu, select Math Setup.
To use.
■
Click the Logic Properties button when you want to specify the voltage threshold level of the Ch1-Ch4 (live) and M1-M4
(math) channels to use as logic waveforms and to include in a bus.
■
Click the Logic Properties button to set the voltage threshold levels in the Logic Threshold Setup Window.
What do you want to do next?
Continue to learn about the Vertical Setup controls.
Learn about the Logic Threshold Setup menu.
Set the logic thresholds
NOTE. The Logic Threshold Setup option is available only on MSO5000B and MSO70000C/DX Series instruments and
DPO5000B Series instruments with option MSOE installed, and DPO70000DX instruments with option MSOU installed.
Select the Vertical Setup or the Math Setup menu, and then click the Logic Properties button.
Overview. Use this control window to specify the voltage threshold level of the Ch1-Ch4 (live) and the M1-M4 (math) channels to
use as logic waveforms and to include in a bus.
Oscilloscope reference
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series 753

Tektronix DPO71254C Specifications

General

Brand	Tektronix
Model	DPO71254C
Category	Test Equipment
Language	English