Tektronix DPO7254C Printable Help

Learn about using text with screen displays.
Display persistence
From the Display menu, select Display Setup; then open the Appearance tab.
To use
Click one of the buttons to select the display persistence.
■
Click Infinite (persistence) to continuously accumulate record points on the waveform until you change one of the acquisition
display settings.
■
Click Variable; then click in the Time entry box and use the multipurpose knobs to set the persistence time.
■
Click Reset to clear the persistence.
■
Click the Controls to activate the Persistence Control window.
Behavior
■
Use infinite persistence for displaying record points that may occur outside the normal acquisition envelope.
■
Use Variable to accumulate record points on the waveform for a specified time interval. Each record point decays
independently according to the time interval.
■
If you click Off, the waveform record points appear for the current acquisition only.
TIP. Use the Display menu Display Persistence submenu or right-click in the graticule and select Display Persistence from
the shortcut menu to directly access the persistence options.
What do you want to do next?
Learn about changing the display colors.
Learn about using text with screen displays.
Learn about changing the appearance of objects in the display.
Display setups
172 DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series

Tektronix DPO7254C Specifications

General

Brand	Tektronix
Model	DPO7254C
Category	Test Equipment
Language	English