Tektronix MDO4054-3 User Manual

Display Wavefor
morTraceData
Positioning and Labeling Bus Signals
Positioning bus signals. Push the appropriate front-panel bus button and turn multipurpose knob a to adjust the vertical
position of the selected bus. (See page 60, Setting Up a S erial or Parallel Bus.)
1. Push the appropriate front-panel bus button
to select that bus.
2. Turn multipurpose knob a to adjust the
vertical position of the selected bus.
Labeling bus signals. To label a bus, do the following steps:
1. Push the appropriate front-panel bus button.
2. Push Label.
(See page 51, Labeling Channels and Buses.)
Bus (B1)
Parallel
Define
Inputs
Thresholds
(B1) Label
Parallel
Bus
Display
Event
Table
Positioning, Scaling, and Grouping Digital Channels
1. Push the front-panel D15–D0 button.
106 MDO4000 Series Oscilloscopes User Manual

Tektronix MDO4054-3 Specifications

General

Brand	Tektronix
Model	MDO4054-3
Category	Test Equipment
Language	English