Installation
12. You can now type
in a standard query, such
as,
*idn?.
The Telnet session window will respond by
displaying a c
haracter string describing your
instrument.
You can type in more queries and view
more results
using this Telnet session
window. You can find the syntax for relevant
commands, queries and related status
codes in the M
SO4000B, DPO4000B, and
MDO4000 Series Programmer Manual.
NOTE. Do not use the computer’s backspace
key during a
n MS Windows Telnet session with
the oscilloscope.
Connecti
ng a USB Keyboard to Your Oscilloscope
You can connect a USB keyboard to a USB Host port on the rear or front panel of the oscilloscope. The oscilloscope will
detect the keyboard, even if it is plugged in while the oscilloscope is powered on.
You can use the keyboard to quickly create names or labels. You can bring up the Label menu through the lower-bezel label
button of the Channel or Bus menus. Use the arrow keys on the k eyboard to move the insertion point, and then type in a
name or label. Labeling channels and buses makes the information on the screen easier to identify.
To choose whether to use a keyboard with a United States (US) key layout or one with an alternative layout.
1. Push Utility.
2. Push Utility Page.
Utility
Page
Config
Language
English
Set Date &
Time
TekSecure
Erase
Memory
About
3. Turn multipurpose knob a and select Config.
4. Push Language from the resulting
lower-bezel menu.
5. Push USB K eyboard from the r esulting side
menu.
6. Turn multipurpose knob a and select the
desired keyboard layout style from the
resulting menu.
32 MDO4000 Series Oscilloscopes User Manual
To Next Page
Loading...
Need help?
General
