Tektronix TCPA300 SERIES User Manual

TCP303 and TCP404XL Performance Verification
5-32
TCPA300/400 Amplifiers and TCP300/400 Series Current Probes Instruction Manual
Equipment Required
To perform the acceptance tests in this section, you will need the test equipment
listed in Table 5--17. The test equipment must meet or exceed the specifications
listed. The test procedures may need to be modified if the recommended
equipment is not used.
Table 5- 17: Required test equipment
Qty Item Description
Recommended
equipment
1 Oscilloscope 100 MHz bandwidth Tektronix TDS5000
1 High Amplitude Pulse Generator
(TCP303 only)
Rise time <5 ns, pulse width
>100 ns,amplitude >20 V
p-p
into
50 Ω
Picosecond Labs 2600
1 High Amplitude Pulse Generator
(TCP404XL only)
Square wave wi th a rise time <35 ns,
≥5Ainto50Ω
AVTECH AVR-3-PW-C-P-TEK2
1 Leveled Sine Wave Generator
(TCP303 only)
3 MHz to 20 MHz Wavetek 9100 with Option 250
1 Current Source DCA: 0.1% accuracy, 0 to ±15 A Wavetek 9100
1 Digital Multimeter DCV: 0.1% accuracy 5
1
/
2
digit
resolution
Keithley 2700
1 Current Probe Amplifier Use appropriate amplifier Tektronix TCPA300 or TCPA400
1 BNC Cable 50 Ω, 0.76 m (30 in) long Tektronix part number 012-0117-00
1 Cable TEKPROBE Interface Tektronix part number 012-1605-00
1 Adapter BNC-to-Dual Banana Tektronix part number 103-0090-00
1 HF Current Loop (TCP303 onl y) 50 Ω, BNC Connector Tektronix part number 015-0601-50
1 DC Current Loop 50 turns 13 AWG coated wire Refer to page 5--4
1 Precision Termination 50 Ω, ±0.1%, 0.5 W Tektronix part number 011-0129-00

Tektronix TCPA300 SERIES Specifications

General

Brand	Tektronix
Model	TCPA300 SERIES
Category	Amplifier
Language	English