Internet Access Setup
- 16 -
Method 3: For users who have fixed IP addresses provided by operators for Internet access, the connection
method is Static IP. Perform settings by referring to the figure below.
Configuration steps:
❶ Connection Type: Click to select Static IP.
❷ IP Address, Subnet Mask, Default Gateway, and Preferred/Alternate DNS: Enter fixed IP address
information provided by the broadband operator.
❸ Operator: Select an operator that handles the broadband.
❹ Line Bandwidth: Enter the size of broadband.
❺ Click OK to finish settings.
Wait a moment. When Connection Status is displayed as Connected, you can try to surf the Internet.
To Next Page
Loading...
Need help?
General
