Device Management
- 26 -
The reference application scenario is as follows:
Configuration steps:
❶ Port Mirroring: Click Enable.
❷ Mirrored port: Click to select monitored ports such as LAN1, LAN2, WAN1, and WAN0.
❸ Click OK.
After settings are finished, the computer installed with monitoring software (connected to the LAN0 port of the
router) can monitor packets of other ports.
4.2.5 Static Route
Overview
Routing is a behavior to select one optimal path to transmit data from a source address to a destination address.
Static route is a special route manually configured. It is characterized by simpleness, high efficiency, and reliability.
A suitable static route may reduce route selection problems and the overload of route selection data stream and
To Next Page
Loading...
Need help?
General
