Tenda O1 User Manual

94
Parameters description
Name
Description
DHCP Server
It specifies whether to enable the DHCP server function of the device. By default, it
is enabled.
Start IP Address
It specifies the start IP address of the IP address pool of the DHCP server. The
default value is 192.168.2.100.
End IP Address
It specifies the end IP address of the IP address pool of the DHCP server. The
default value is 192.168.2.200.
The start and end IP addresses must belong to the same network segment as the IP
address of the LAN port of the device.
Subnet Mask
It specifies the subnet mask assigned by the DHCP server to clients. The default
value is 255.255.255.0.
Gateway Address
It specifies the default IP address gateway assigned by the DHCP server to clients.
Generally, it is the IP address of the LAN port of a router on the LAN. The default
value is 192.168.2.254.
A client can access a server or host not in the local network segment only through
a gateway.
Primary DNS Server
It specifies the primary DNS server IP address assigned by the DHCP server to
clients. The default value is 8.8.8.8.
To enable clients to access the internet, set this parameter to a correct DNS server
IP address or DNS proxy IP address.
Secondary DNS Server
It specifies the secondary DNS server IP address assigned by the DHCP server to
clients. This parameter is optional.
Lease Time
It specifies the validity period of an IP address assigned by the DHCP server to a
client.
When half of the lease time has elapsed, the client sends a DHCP request to the
DHCP server to renew the lease time. If the request succeeds, the lease time is
extended according to the request. Otherwise, the client sends the request again
when 7/8 of the lease time has elapsed. If the request succeeds, the lease time is
extended according to the request. Otherwise, the client must request an IP
address from the DHCP server after the lease time expires.
It is recommended that you retain the default value.

Tenda O1 Specifications

General

5 GHz	No
Bandwidth	2.4 GHz
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Maximum data transfer rate	300 Mbit/s
Placement	Wall
Certification	FCC/CE/RoHS
Product color	White
LED indicators	LAN, PoE, WLAN
International Protection (IP) code	IP64
Output voltage	9 - 12 V
Power consumption (max)	2.6 W
Security algorithms	WEP, WPA-PSK, WPA2-PSK
USB 2.0 ports quantity	0
Ethernet LAN (RJ-45) ports	1
Antenna features	Integrated antenna
Cables included	LAN (RJ-45)
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-30 - 55 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	67.5 mm
Width	80 mm
Height	190.35 mm