Tenda O1 User Manual

173
9 Tools
9.1 Date & time
This module enables you to set the system time of the device.
Ensure that the system time of the device is correct, so that logs can be recorded correctly and the
reboot schedule can be executed correctly.
Choose Tools > Date & Time to enter the page.
The device allows you to set the system time by synchronizing the time with the internet or
manually setting the time. By default, it is configured to synchronize the system time with the
internet.
9.1.1 Synchronized with the Internet
The device automatically synchronizes its system time with a time server of the internet. This
enables the device to automatically correct its system time after being connected to the internet.
For details about how to connect the CPE to the internet, refer to the configuration procedure of
corresponding mode in Quick Setup.

Tenda O1 Specifications

General

5 GHz	No
Bandwidth	2.4 GHz
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Maximum data transfer rate	300 Mbit/s
Placement	Wall
Certification	FCC/CE/RoHS
Product color	White
LED indicators	LAN, PoE, WLAN
International Protection (IP) code	IP64
Output voltage	9 - 12 V
Power consumption (max)	2.6 W
Security algorithms	WEP, WPA-PSK, WPA2-PSK
USB 2.0 ports quantity	0
Ethernet LAN (RJ-45) ports	1
Antenna features	Integrated antenna
Cables included	LAN (RJ-45)
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-30 - 55 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	67.5 mm
Width	80 mm
Height	190.35 mm