www.ti.com
ADS1298ECG-FE/ADS1198ECG-FE Overview
3
SBAU171D–May 2010–Revised January 2016
Submit Documentation Feedback
Copyright © 2010–2016, Texas Instruments Incorporated
ADS1298ECG-FE/ADS1198ECG-FE
43 Internal Power Plane (Layer 3)........................................................................................... 44
44 ECG Cable Schematic..................................................................................................... 46
45 15-Pin, Shielded Connector from Biometric Cables ................................................................... 47
46 15-Pin, Twisted Wire Cable to Banana Jacks.......................................................................... 47
47 15-Pin, Twisted Wire Cable............................................................................................... 47
48 Cardiosim ECG Simulator Tool........................................................................................... 48
49 Recommended Power Supply for ADS1x98ECG-FE.................................................................. 49
50 Initialization of ADS1x98ECG-FE ........................................................................................ 50
51 License Agreement ........................................................................................................ 50
52 Installation Process ........................................................................................................ 50
53 Completion of ADS1x98ECG-FE Software Installation................................................................ 50
List of Tables
1 ADS1x98ECG-FE Default Jumper/Switch Configuration............................................................... 7
2 ADS1298 Lead Measurements........................................................................................... 32
3 Derived Lead Calculations ................................................................................................ 32
4 RLD Jumper Options ...................................................................................................... 33
5 ADS1x98ECG-FE Default Jumper/Switch Configuration ............................................................. 36
6 Power-Supply Test Points................................................................................................. 37
7 Analog Supply Configurations (AVDD/AVSS) .......................................................................... 38
8 Digital Supply Configurations (DVDD/DGND) .......................................................................... 38
9 CLK Jumper Options....................................................................................................... 38
10 External Reference Jumper Options..................................................................................... 39
11 Test Signals................................................................................................................. 39
12 Serial Interface Pinout ..................................................................................................... 39
13 Bill of Materials: ADS1x98ECG-FE ..................................................................................... 42
Trademarks
Pentium III, Celeron are registered trademarks of Intel Corporation.
Microsoft, Windows are registered trademarks of Microsoft Corporation.
SPI is a trademark of Motorola Inc.
All other trademarks are the property of their respective owners.
1 ADS1298ECG-FE/ADS1198ECG-FE Overview
1.1 Important Disclaimer Information
CAUTION
NOTICE: The ADS1298ECG-FE and ADS1198ECG-FE are intended for
feasibility and evaluation testing only in laboratory and development
environments. This product is not for diagnostic use. This product is not for use
with a defibrillator.
The ADS1298ECG-FE/ADS1198ECG-FE is to be used only under these conditions:
• The ADS1298ECG-FE/ADS1198ECG-FE is intended only for electrical evaluation of the features of
the ADS1298 device in a laboratory, simulation, or development environment.
• The ADS1298ECG-FE/ADS1198ECG-FE is not intended for direct interface with a patient, patient
diagnostics, or with a defibrillator.
• The ADS1298ECG-FE/ADS1198ECG-FE is intended for development purposes ONLY. It is not
intended to be used as all or part of an end equipment application.
To Next Page
Loading...
Need help?
General
