Using the ADS1298ECG-FE Software
www.ti.com
8
SBAU171D–May 2010–Revised January 2016
Submit Documentation Feedback
Copyright © 2010–2016, Texas Instruments Incorporated
ADS1298ECG-FE/ADS1198ECG-FE
3 Using the ADS1298ECG-FE Software
The ADS1298ECG-FE software provides complete control over all the settings of the ADS1298. By using
the user interface (UI), the ADS1298 control registers can be manipulated to evaluate the various options
available on the device. Figure 3 shows the starting UI screen of the software. The UI consists of a user
menu (Section 3.1), a few top-level controls (Section 3.2), and a tabbed interface, with different functions
available on the different tabs. The tabs are:
• About (Section 3.3)
• ADC Register (Section 3.4.3)
• Analysis (Section 3.5)
• Save (Section 3.6)
Figure 3. Software Start Screen/About Tab
The user can adjust the settings when the software is not acquiring data. During acquisition, all controls
are disabled and settings may not be changed. When a setting is changed via a control, the settings are
immediately updated on the device and EVM. Settings in the software correspond to settings described in
the ADS1298 product data sheet.
To Next Page
Loading...
Need help?
General
