TomTom BRIDGE User Manual

92
6. Save your route in the My Routes list.
Tip: You can also save a route using the Add to My Routes button in the Current Route
menu.
Navigating using a saved route
To navigate using a previously saved route, do the following:
1. In the Main Menu, select My Routes.
2. Select a route from your list.
The route is shown on the map view.
3. To navigate to the start of the saved route, select Drive/Ride depending on which device you
are using.
The starting point of the saved route is converted to your first stop and then the route is
planned. Guidance to your destination begins from your current location. As soon as you start
driving, the guidance view is shown automatically.
Tip: There are two other ways to navigate using a saved route:
Select the starting point of the route. When the pop-up menu opens, select Change to a
Stop.
Alternatively, select Drive to Route or Ride to Route in the Current Route menu.

TomTom BRIDGE Specifications

General

Megapixel	5 MP
Speaker power	2 W
Processor frequency	1.2 MHz
Operating system installed	Android
Number of built-in speakers	1
Text-to-speech message reader	-
Display diagonal	7 \
Touch technology	Multi-touch
Display resolution	1024 x 600 pixels
Bluetooth version	4.0
RAM capacity	1024 MB
Storage media type	Flash
Internal memory type	RAM
Compatible memory cards	MicroSD (TransFlash)
Internal storage capacity	16 GB
Operating temperature (T-T)	-20 - 60 °C
Map coverage	All Europe
Lifetime map updates	Roads change, but with Lifetime Map Updates your map will always be up to date. Start fresh every few months by downloading a new edition of the industry's most accurate map. New editions are issued four times per year.
Power source type	Cigar lighter
Form factor	Fixed
Product color	Black
Geocaching (GPS stash hunt)	No

Weight and Dimensions

Height	- mm
Weight	- g