TomTom BRIDGE User Manual

93
Navigating to a stop on a saved route
You can navigate from your current location to a stop on your saved route instead of to the start of
the saved route. The stop is changed to the start of your route. Your new starting point might be
one closer to your current location, or you might just want to make your route shorter.
Note: The route from the original starting point up to the new starting point is removed from
the route.
Note: Your original route in My Routes is not changed. If you want to see the whole route,
select the route again in My Routes.
1. In the Main Menu, select My Routes.
2. Select a route from your list.
The route is shown on the map view.
3. Select the stop that you want to use as your starting point, then select the pop-up menu
button to open the menu.
4. Select Start Route From Here.

TomTom BRIDGE Specifications

General

Megapixel	5 MP
Speaker power	2 W
Processor frequency	1.2 MHz
Operating system installed	Android
Number of built-in speakers	1
Text-to-speech message reader	-
Display diagonal	7 \
Touch technology	Multi-touch
Display resolution	1024 x 600 pixels
Bluetooth version	4.0
RAM capacity	1024 MB
Storage media type	Flash
Internal memory type	RAM
Compatible memory cards	MicroSD (TransFlash)
Internal storage capacity	16 GB
Operating temperature (T-T)	-20 - 60 °C
Map coverage	All Europe
Lifetime map updates	Roads change, but with Lifetime Map Updates your map will always be up to date. Start fresh every few months by downloading a new edition of the industry's most accurate map. New editions are issued four times per year.
Power source type	Cigar lighter
Form factor	Fixed
Product color	Black
Geocaching (GPS stash hunt)	No

Weight and Dimensions

Height	- mm
Weight	- g