1 SETTING ITEMS (USER)
Setting General Functions 9
Setting General Functions
This menu allows you to perform the following operations:
y P.9 “Changing the display language”
y P.10 “Setting the reversed display mode”
y P.12 “Adjusting the display contrast”
y P.13 “Setting the calibrations”
y P.15 “Setting the registration”
Changing the display language
The language used on the touch panel can be changed to a different one.
1
Press [GENERAL] in the USER menu.
The GENERAL menu is displayed.
To display the USER menu, see the following page:
P.8 “Entering User Menu”
2
Press [CHANGE LANGUAGE].
The CHANGE LANGUAGE screen is displayed.
3
Select the desired language and press [OK].
The touch panel is displayed in the selected language.
To Next Page
Loading...
Need help?
General
