2 SETTING ITEMS (ADMIN)
172 Setting E-mail Functions
Setting E-mail Functions
This function allows you to set the following items.
For the e-STUDIO456 Series or e-STUDIO856 Series, [E-MAIL] is available only when the Scanner Kit (optional) or
Printer/Scanner Kit (optional) is installed.
y E-mail Message Properties
You can configure the following message properties of e-mail documents that will be sent by the Scan to E-mail
operation.
- FROM ADDRESS
- FROM NAME
- SUBJECT
-BODY
y Scan to E-mail Fragmentation
You can send a Scan to E-mail job split into the fragment size specified. This option can reduce transmission errors
caused by network traffic problems.
y E-mail Body String Transmission
You can specify whether the body string will be transmitted or not.
1
Press [E-MAIL] in the ADMIN menu (1/2).
The E-MAIL screen is displayed.
To display the ADMIN menu, see the following page:
P.75 “Entering Admin Menu”
To Next Page
Loading...
Need help?
General
