Toshiba e-STUDIO6550C Series Management Guide

2.SETTING ITEMS (ADMIN)
Setting General Functions 85
2 SETTING ITEMS (ADMIN)
 Setting the date and time
The clock built in to this equipment can be set by entering the date and time using the digital keys.
When the time settings of the equipment are adjusted using the SNTP service, this cannot be done manually for the
date and time. You can make settings for the SNTP service in the TopAccess administrator mode. For details, refer to
the TopAccess Guide “Chapter 8: [Administration] Tab Page”.
1
Press [GENERAL] in the ADMIN (1/2) menu.
The GENERAL menu (1/2) is displayed.
To display the ADMIN menu, see the following page:
 P.75 “Entering Admin Menu”
2
Press [CLOCK].
The CLOCK menu is displayed.
3
Continue the operation that you require.
 P.86 “Changing the date and time”
 P.87 “Changing the date format”

Toshiba e-STUDIO6550C Series Specifications

General

Brand	Toshiba
Model	e-STUDIO6550C Series
Category	All in One Printer
Language	English